Installation and placing in service

How to install the RiderEcall System on your motorcycle

Items supplied

Your packaging box contains the following:

  • The helmet sensor with integrated battery incorporated in a rubber cover
  • The motorcycle unit with integrated battery, integrated SIM card and its own serial number which is already connected to the power supply cable
  • The mount for the motorcycle unit
  • The operating instructions (manual)
  • The Quick-Start Guide
  • The demo CD
  • USB cable

The motorcycle unit

The motorcycle unit is fastened on the motorcycle's handlebars using the universal mount supplied – just as simply as when you attach optional navigation devices.

The only condition is a direct visual contact to the GPS satellites and an interference-free connection to the GSM mobile phone network.

Naturally the system has also been tested in rigorous applications and is manufactured in accordance with IP code IP65. Protection is thus provided against water, dust, cold (-20° Celsius) and heat (+60° Celsius).

The motorcycle unit is connected to the on-board socket of your motorcycle using the pre-installed power supply cable (DIN ISO 4165; 12V).

The helmet unit:

The helmet unit consists of two parts: the actual helmet sensor and a weatherproof rubber cover which you attach to your helmet.
To ensure that the helmet unit operates perfectly, the two parts are supplied already connected to each other.
The helmet sensor is fastened to the helmet by means of a specially designed adhesive strip.

We recommend that you position the assembled sensor at the centre of the rear of your helmet to avoid influencing the aerodynamic and aeroacoustic performance of the helmet. The helmet sensor can also be attached anywhere on the outside of the helmet shell, both vertically and horizontally.

The SCHUBERTH RiderEcall is designed for the premium helmets from SCHUBERTH. However, it also fits helmets from other vendors (no guarantee).

Activation

To activate the Schuberth RiderEcall System you must register the device at Schuberth.com.
When it is registered, the device is set to your language and the integrated SIM card is released for the GSMN connection.